LIVESOUND & PA - EQUIPMENT 2021
|
|
|
|
|
Digital Live-Mixer / FOH
|
|
|
Behringer X32 - Fullsize Digital FOH Mixer
Digital 32-channel mixer with fully programmable high-end mic preamps and 16 configurable mix buses as subgroups. The X32 is intuitive and powerful with 40 processing channels and 25 mix buses, equipped with high-quality effects (dynamics, EQ and inserts), which can be quickly configured to meet the demands of virtually any gig needs. Development took place in close cooperation with sister companies Behringer, Midas and Klark Teknik. The programmable, high-quality microphone preamps in X32 based on genuine MIDAS bishin design for A/D converter. The resulting design provides superior common mode rejection ratio (CMRR) and a very low distortion (THD).
|
|
|
|
Analog Live-Mixer
|
top
|
|
Allen & Heath ZED 16 FX / USB
The Allen & Heath ZED-16 FX is an analog 20-channel compact mixer with built-in effects processor. 16 different effects can be accessed by simple operation. Including delay, reverb, chorus and flanger. Over a Tap button, for example, the pace of delay effects can be determined. The ZED-12 FX has 10 XLR Mic-/Line and 3 stereo line inputs. 100 mm faders - external 3 aux. The USB port also allows the recording of a PC.
|
|
top
|
|
Allen & Heath ZED 12 FX / USB
The Allen & Heath ZED-12 FX is an analog 12-channel compact mixer with built-in effects processor. 16 different effects can be accessed by simple operation. Including delay, reverb, chorus and flanger. Over a Tap button, for example, the pace of delay effects can be determined. The ZED-12 FX has 6 XLR Mic-/Line and 3 stereo line inputs. 100 mm faders - external 3 aux. The USB port also allows the recording of a PC.
|
|
top
|
|
Allen & Heath ZED 60-10 FX / USB
The Allen & Heath ZED 60-10 FX is an analog 8-channel ultra compact mixer with built-in effects processor. 16 different effects can be accessed by simple operation. Including delay, reverb, chorus and flanger. Over a Tap button, for example, the pace of delay effects can be determined. Two of the four mono channels have high-impedance jack connectors that have been specially designed to enhance a line signal or a relatively faint signal from a guitar pick - a direct box is no longer necessary! The ZED FX has 4 XLR 60-10 Mic-/Line and 2 stereo line inputs. 60 mm faders - external 1 Aux. The USB port also allows the recording of a PC.
|
|
top
|
|
Alto Live 1604
The Alto Live 1604 is an easy-to-use yet powerful live mixer with built-in effects processor: The Live 1604 has either 10 XLR Mic / Line inputs or 4 Stereo-Line and 8 XLR Mic / Line inputs and 3 Aux external. Each XLR channel has a 3-band tone control with semiparametrics in the center band. In addition, a switchable 9-band graphic EQ for master output or monitor application is available as well as 4 switchable subgroups. A 48V phantom power can also be switched on if desired.
|
|
top
|
|
Alto Live 1202
The Alto Live 1202 is an easy-to-use compact mixer with built-in effects processor: The Live 1202 has either 7 XLR Mic / Line inputs or up to 4 Stereo-Line and 4 XLR Mic / Line inputs and 1 Aux external. Each channel has a 3-band tone control with fixed bandwidth. In addition, a switchable 9-band graphic EQ is available for master output or monitor application. A 48V phantom power can also be switched on if desired.
|
|
top
|
|
Alto Live 802
The Alto Live 802 is an easy-to-use compact mixer with built-in effects processor: The Live 802 has either 5 XLR mic / line inputs or 2 stereo line and 4 XLR mic / line inputs and 1 external aux. Each channel has a 3-band tone control with fixed bandwidth. In addition, a switchable 9-band graphic EQ is available for master output or monitor application. A 48V phantom power can also be switched on if desired.
|
|
top
|
|
Alto ZMX 122FX
The Alto ZMX 122FX is an easy-to-use ultra-compact live mixer with built-in effects processor: The ZMX 122FX has 4 XLR mic / line + 2 stereo line inputs and 1 aux external. Each channel has a 3-band tone control with fixed bandwidth. Rotary potentiometers are used to control the volume.
|
|
|
|
|
|
|
Column-Speaker // active
|
top
|
|
dB Technologies ES1002 The Colunm-PA-System for adults
The ES1002 from dB-Technologies is an active, professional and very elegant column PA system with an output of 1800 watts peak power / 900 watts RMS. The subwoofer of the ES1002 is equipped with two 12” bass drivers in a semi-horn / bass reflex configuration and delivers a detailed and particularly powerful bass reproduction. The top is equipped with a total of 8x4” high-mid transducers, the alignment of which provides an asymmetrical vertical coverage. In addition, each 4” speaker has a newly developed phase plug that extends the horizontal radiation and ensures perfect intelligibility in every listening position. The elegant housings are made of sturdy multiplex wood with a professional black finish and visually appealing protective grilles. The acoustically optimized use provides for the use of two ES1002 systems. However, a single system can also be used for smaller applications such as voice reinforcement. The dB-Technologies ES1002 is designed as a mono system and each has an XLR combo socket + stereo chinch as an input and a symmetrical XLR output for continuing the signal. Due to its compact dimensions, the dB-Technologies ES1002 entertainment system is equally suitable for ambitious musicians and DJs as well as for voice reinforcement and media applications in Mallorca.
|
|
|
|
|
|
PA-Speaker // active
|
|
|
top
|
|
dB Technologies Opera UNICA 12 The flagship of the Opera series
With the Opera UNICA 12 dB-Technologies sets new standards in the field of portable loudspeakers.The active PA speaker features a CLASS D DIGIPRO G3 amplifier module capable of delivering up to 1800 watts peak power (900 watts RMS) and a modern neodymium woofer.What sets the Opera UNICA series apart is the network functionality provided by the Aurora-Net control software with built-in RDNet ports that allow for EQ, delay and sound processing, as well as real-time monitoring. The unmistakable asymmetric acoustic design of the Opera Horn's HF horn ensures optimum coverage.In addition, the sound processing with FIR filtering provides excellent and linear reproduction with crystal clear audio performance. These features make the new dB-Technologies Opera UNICA 12 the first choice for professional DJs and musicians.
|
|
top
|
|
RCF HD10-A Compact powerhouse with high-resolution sound
With the new HD10-A RCF provides a particularly compact active 2-way multifunctional speaker is for the discerning musician. Equipped with a very powerful 600 watt Class-D power amplifier is the latest generation of the RCF HD10-A, the pro audio tool for demanding live gigs on Mallorca. 10 "woofer and 1" compression driver provides complete full rank and suitability for the first time of RCF is a plastic housing with all its advantages at the same time very inconspicuous appearance. As a powerful speaker in combination with active subwoofers can be achieved very impressive and very transparent sound reproduction. The RCF-A HD10 delivers impressive 129 dB SPL.
Technical specifications: Driver 10" + 1" • 600 watts RMS / 1200 watts peak • Max SPL 129 dB • Frequency response 50 Hz - 20 kHz (-3 dB) • Digital Pre-Amp • DSP processor • 90 ° x 60 ° • Weight 13.9 kg
|
|
top
|
|
RCF ART 712-A MKII The powerful classic at parties par excellence
You need to amplify some speech, recorded music and finish the show with a live set? ART 712-A is the answer: a multi purpose speaker that represents the best choice for situations in which a full frequency range with punchy bass and high definition is needed. The ART 712-A is a very versatile speaker that can be easily used as DJ-Speaker, Live-Performance and also for monitoring applications.
Technical specifications: Driver 12" + 1" • 700 Watt RMS / 1400 Watt Peak • Max SPL 129 dB • Frequency Response 50 Hz - 20 Khz (-3dB) • Digital Preamp • DSP Processor • 90 ° x 60 ° • Weight 17.7 Kg
|
|
top
|
|
RCF ART 312-A MKIII Perfect all-rounder with a good bass
A 12"/1" components can be used as the absolute industry standard referred. In the case of the RCF ART-312A MKIII this is of course with the highest quality components designed RCF, providing in the 3rd Generation driven by a 400 W / RMS digital amplifier including DSP excellent reproduction characteristics with clean highs, natural mids and a punchy bass. Thanks to the convection ART312-A is like the entire RCF Series maintenance-free for maximum reliability. The RCF ART 312-A MKIII On the back, a boost switch to increase the bass - so the speaker and for the stand-alone operation without a subwoofer for smaller events suited! The new RCF ART 312-A MKIII delivers official 128 dB SPL
Technical specifications: Driver 12" + 1" • 400 Watt RMS / 800 Watt Peak • Max SPL 128 dB • Frequency Response 45 Hz - 20 Khz (-3dB) • Digital Pre-Amp • DSP Processor • 90 ° x 70 ° • Weight 17.4 Kg.
|
|
top
|
|
RCF ART 310-A MKIII Compact all-rounder for musicians
The ART 310-A is one of the world's most successful speakers. Despite its compact size and low weight, it offers great sound and impressive bass response. It can be ideal for smaller applications used fullrange without a subwoofer, and in combination with a subwoofer (RCF SUB 705-AS). In the 3rd Generation is the ART 310-A MKIII equipped with a modern digital amplification, including DSP and thus has even more amplifier power than your ancestors. Key to clear, brilliant highs and distortion-free is still the outstanding RCF 1 "tweeter with 1.4" Mylar. The new RCF ART 310-A MKIII provides 400 watts / RMS and achieved remarkable 127 dB SPL!
Technical specifications: Driver 10"+ 1" • 400 Watt RMS / 800 Watt Peak • Max SPL 127 dB • Frequency Response 50 Hz - 20 Khz (-3dB) • Digital Pre-Amp • DSP processor • 90 ° x 70 ° • Weight 12.6 Kg
|
|
top
|
|
dB Technologies Opera 12 The powerful standard for live bands & musicians
User-friendliness, quality and performance characterize the Opera 12 speakers from dB Technologies. Not only its simple and elegant appearance, which can fit into every environment very well, but also the technology and its features convince to their full length. Multifunctional housing is the keyword when it comes to design and installation: the speaker is not only standard on tripods thanks to the 36mm flange, but also allows horizontal positioning on the ground. At the same time, the sound is also affected, since the special construction provides the 1 "tweeter for a wide coverage of the audience. The 12" woofer provides for a decent bass. In combination with the built-in Class-D amplifier, controlled by the DSP, you get a whopping 600 watts (1200 watts peak), a glass-clear, punchy sound and enough pressure for all Mallorca weddings and events.
Technical specifications: Driver 12"+ 1" • 600 watts RMS / 1200 watts peak • Max SPL 129 dB • Frequency response 67 Hz - 20 kHz (-3 dB) • Digital Pre-Amp • DSP processor • 90 ° x 70 ° • Weight 14.3 kg
|
|
top
|
|
dB Technologies B-Hype 12 The perfect choice of performance, sound and budget
The design of the B-HYPE 12 is very simple to fit well into all situations and provides flexibility for multiple applications. A robust polypropylene housing as well as front grilles protect the interior optimally from external influences and make the B-Hype12 to the good companion on Mallorca - no matter whether fincaurlaub, Poolparty or small Livegig. The B-HYPE 12 Speaker convinces with the built-in digital signal processor (DSP) and a resolution of 48 kHz and 24 Bit. In combination with the 12 "woofer and 1" tweeter, a transparent and musical frequency response is created. A wide beam angle ensures a good coverage of the audience.
Technical specifications: Driver 12"+ 1" • 200 Watt RMS / 400 Watt Peak • Max SPL 126 dB • Frequency response 61 Hz - 19.6 Khz (-6dB) • Digital Pre-Amp • DSP processor • 85 ° x 70 ° • Weight 13 , 9 kg
|
|
top
|
|
dB Technologies Cromo 12 The perfect choice of performance, sound and budget
The classic combination of a 12 "woofer and 1" compression driver allows use of the expanded frequency range and higher sound pressure the ideal use as a powerful full range system for live musicians. The Cromo 12 is a modern 2-way active box equipped with a 300 watt bi-amplified digital amplifier with DSP processor. Especially powerful bass and clear treble, they stand out. A specially fabricated asymmetrical horn ensures that visitors are optimum sound quality. As a powerful speaker in conjunction with active subwoofers can be achieved powerful and transparent sound reproduction.
Technical specifications: Driver 12"+ 1" • 300 watts RMS / 600 watts peak • Max SPL 126 dB • Frequency response 60 Hz - 19 kHz (-3 dB) • Digital Pre-Amp • DSP processor • 90 ° x 70 ° • Weight 18.5 kg
|
|
top
|
|
dB Technologies L-160D Very compact, versatile & powerful
The speaker technologies dB L-160D is a powerful (160 watt), light compact speaker and offers a variety of connectivity options and ease of use for multimedia sound reinforcement applications. The relatively high sound pressure of 116 dB is achieved by two phase-corrected 5 "Speaker, distinguished through digital sound processor (DSP) with a brilliant sound with high intelligibility. One of the two 5 "speaker is designed as a coaxial system with a dome tweeter with horn front attachment, resulting in a very uniform and controlled reproduction of the high tone. Onboard DSP offers 8 predefined settings to optimize the playback properties: "live, playback, stage monitor, Male, Female, studio monitor and Autoloudness".
Technical specifications: Drivers 2x5"+ 1" • 160 watts peak • Max SPL 116 dB • Frequency response 70 Hz - 20 kHz (-10 dB) • Digital Pre-Amp • DSP processor • 85 ° x 75 ° • Weight 5.2 kg
|
|
|
|
|
Stage-Monitors // active
|
|
|
top
|
|
dB Technologies FM12
The db Flexsys FM-12 is the first choice for demanding live music and DJs in loud environments. It offers the perfect facilities as a powerful fullrange monitor for a loud and powerful reproduction of lead vocals, guitars and electronic musical instruments or music recordings due to the high performance and the use of a 12 "woofer. Active Coaxial Stage Monitor - The Flexsys FM Series is revolutionizing the live sound reinforcement, offering customized display solutions in compact multifunctional enclosures, equipped with innovative technologies that set new standards in terms of intelligibility and handling. The very first choice for a perfect stage monitoring in Mallorca.
Technical specifications: 12"/1" - Coax, 300 watt RMS active, 17.0 kg, DSP with 8 presets
|
|
top
|
|
dB Technologies FM10
The db Flexsys-FM-10 offers remarkably powerful, dynamic and precise voice reproduction and is already suitable as a compact full-range system with extended bass reproduction; the ideal monitor for vocals and keyboards. Active Coaxial Stage Monitors - The Flexsys FM series revolutionizes live sound reinforcement and offers tailor-made monitor solutions in compact multifunctional housings, equipped with innovative technologies that set new standards in terms of intelligibility and handling. The first choice for perfect stage monitoring in Mallorca.
Technical specifications: 10”/1” coax, 200 watts RMS active, 12.8 kg, DSP with 8 presets
|
|
|
|
|
Subwoofers // active
|
|
|
top
|
|
|
RCF SUB 718-AS
The RCF SUB 718-AS is an active subwoofer with high performance. Thanks to the powerful RCF 18 "woofer with 4" voice coil and 1000 W digital amplifier Digipro he is the perfect complement to play low frequencies at high sound pressure to build high-quality sound systems. The RCF SUB 718-AS is recommended as SubLow for 12 "and 10" systems for building powerful Satelittensystemen with outstanding audio performance. A pole mount socket for receiving satellite systems is integrated. Live SubLow official with 132 dB SPL!
Recommended combination with: RCF: HD10-A • ART 712-A MKII • ART 312-A dB-Technologies: Opera Unica • Opera 12
|
|
top
|
|
dB Technologies SUB 618
SUB 618 is a bass-reflex active subwoofer featuring a 600W RMS Class D SMPS Power Amplifier and is equipped with a 18” transducer. The system delivers outstanding sound pressure levels (up to 133dB) in spite of its compact housing, while providing a clean, impressively precise low-end reproduction. Sub 615 outstanding audio performance allow user to build most of the PA systems with 1 single sub and 2 full range speakers, avoiding any external processing or crossover thanks to a balanced Xover signal to left and right speakers. Controls on the amp panel allow user to operate with Mono or Stereo audio feed, activate polarity inversion and choose Outputs link mode (True Bypass or Xover). Ideal for Mallorca - compact and powerful!
Recommended combination with: dB-Technologies: Opera 12 RCF: ART 310-A MKIII • ART 312-A MKIII • HD10-A
|
|
top
|
|
dB Technologies SUB 615
SUB 615 is a bass-reflex active subwoofer featuring a 600W RMS Class D SMPS Power Amplifier and is equipped with a 15” transducer. The system delivers outstanding sound pressure levels (up to 131dB) in spite of its compact housing, while providing a clean, impressively precise low-end reproduction. Sub 615 outstanding audio performance allow user to build most of the PA systems with 1 single sub and 2 full range speakers, avoiding any external processing or crossover thanks to a balanced Xover signal to left and right speakers. Controls on the amp panel allow user to operate with Mono or Stereo audio feed, activate polarity inversion and choose Outputs link mode (True Bypass or Xover). Ideal for Mallorca - compact and powerful!
Recommended combination with: dB-Technologies: B-Hype 12 • Cromo 12 RCF: ART 310-A MKIII
|
|
|
|
|
|
|
|
Portable battery speaker
|
|
|
top
|
|
Alto Transport 12
Portable battery-powered PA speaker system with a power of 200 watts RMS / 400 watts peak power. The ALTO TRANSPORT 12 has a 12 "/ 1" configuration and, in addition to the integrated USB media player, has a conventional connection for line and microphone signals in the form of a combo jack (XLR / jack) and a stereo RCA input. For use with speeches and singing a UHF wireless microphone with a long range is included. The ALTO TRANSPORT 12 is a versatile complete package and the ideal solution for when you are on the move and wherever power is not available. The easy-to-carry system is designed to deliver great sound at weddings or presentations without any power. Of course, use via mains cable is also possible. The recharge time is about 4 hours.
|
|
|
|
top
|
|
Alto Bluetooth Total
Bluetooth extension for PA systems - battery operated. Battery operation: up to 6 hours, charging time up to 4 hours. Bluetooth range: up to 15.2 m
|
|
|
|
|
|
|
In-Ear-Monitoring
|
|
|
|
|
IEM 200 - SET UHF stereo in-ear wireless system
Frequency range: 606 - 630 MHz Up to 16 systems in parallel Stereo mix / mono operation Balance control / volume control / high boost High quality metal design
Set consisting of: 2 x IEM 200 T stereo transmitters 2 x IEM 200 R bodypack receivers with 3.5 mm connection 1 x system case 2 U + accessories
|
|
|
|
|
|
|
Wireless - Systems with microphone
|
|
|
top
|
|
|
Sennheiser EW 100 G4-935 - SET Frequency range 516 - 558 MHz
Due to its simple operating concept, the Sennheiser EW100 series is the first choice for professional artists and sound designers worldwide. The EW 100 G4-935-S vocal set is particularly suitable for singing and presentations.
Set consisting of: 2 x EM 100 G4 receivers 2 x SKM 100 G4 handheld with MD 935 BK capsule 1 x system case 2 U + accessories
|
|
top
|
|
Sennheiser XSW 2-835 Frequency range: 606 - 630 MHz
With the XS Wireless 2 series, Sennheiser offers an easy-to-use and flexible way to reliably transmit vocals, speech and instruments. The focus is on clarity, intuitiveness and above all quality.
Set consisting of: 2 x EM XSW 2 receivers 2 x SKM 835-XSW handheld with MD 835 BK capsule 1 x system case 2 U + accessories
|
|
|
|
top
|
|
Sennheiser XSW 2-Ci1 Frequency range: 606 - 630 MHz
With the XS Wireless 2 series, Sennheiser offers an easy-to-use and flexible way to reliably transmit vocals, speech and instruments. The focus is on clarity, intuitiveness and above all quality.
Set consisting of: 2 x EM XSW 2 receivers 1 x SKM 835-XSW hand with MD 835 BK capsule 1 x SK XSW bodypack / pocket transmitter 1 x system case 2 U + accessories
|
|
top
|
|
LD-Systems 1G8 - Handheld Frequency range: 1785 - 1800 MHz
The LD-Systems WS1G8 with handheld transmitter is a True Diversity wireless microphone system with 192 UHF channels and offers the user a natural sound with large dynamic range and also offers a high signal-to-noise ratio with low harmonic distortion.The WS1G8 series allows simultaneous operation of up to 6 systems. The WS1G8 with dynamic handheld transmitter is particularly suitable for speech and singing.
|
|
top
|
|
LD-Systems 1G8 - Belt Pack Frequency range: 1785 - 1800 MHz
The LD System WS1G8 with Bodypack is a true diversity system with 192 UHF channels and offers the user a natural sound with a large dynamic range and also offers a high signal-to-noise ratio with low harmonic distortion.The WS1G8 series allows simultaneous operation of up to 6 systems. The WS1G8 with bodypack is suitable for transmitting instruments and headsets as well as lavalier microphones.
|
|
|
|
|
Microphones + accessories
|
|
|
top
|
|
Shure Beta 58A
In the tradition of the SM58, the dynamic Beta 58A has become the first choice among singers and professional sound engineers. The Beta 58A is a dynamic, high-output vocals microphone designed for professional audio amplification and use in the recording studio. The supercardioid polar pattern extends over the entire transmission range and guarantees high, feedback resistant amplifications, maximum isolation from other sound sources and a minimum of off-axis sound. The contoured frequency response is ideal for close-up vocals.
|
|
top
|
|
Shure SM 58 LC
The SM 58 is the legend among vocal microphones. It gives the voice a punchy, clear presence, and an exceptional ability in band mix. For decades it was the number 1 on stages worldwide.
|
|
top
|
|
Shure SM 57 LC
The SM 57 is a legend among the instrument microphones. It is the standard for professional acceptance percussion, drums and amplified instruments. Especially on the snare and the electric guitar is one of the most popular microphones.
|
|
top
|
|
Sennheiser E606
The e606 is a dynamic microphone with super-cardioid. It addresses the needs of guitarists and bassists for more direct sound from the guitar amps. Guitar and bass players will love the aggressive, edgy sound of s 606th The sturdy metal housing and the spring-mount design takes the 609th supercardioid microphone from the popular evolution e Thanks "mikrofonierungsfreundlicher" color coding for the front and back stage life in the e 606 is simple to handle.
|
|
top
|
|
AKG P170
The P170 is a small-diaphragm condenser microphone designed for the removal of overheads, drums, acoustic guitars and other stringed instruments.Its lightweight 13mm diaphragm with true capacitor converter provides excellent clarity and transient response.With a slight increase in altitude and a maximum sound pressure of a remarkable 155 dB extremely versatile.Switchable 20 dB pad
|
|
top
|
|
Shure Beta 52 A
The Beta 52A is a standard microphone for top class for the bass drum. It combines the low-end punch with präsentem attack. Even extremely high volume levels without distortion.
|
|
top
|
|
BEYERDYNAMIC TG-D58C
Condenser microphone with patented microphone clamp for rack toms and snare drum. The balanced frequency response and a high level of compatibility in connection with the making of this clip cardioid microphone for top players on drums.
|
|
top
|
|
BEYERDYNAMIC TG-D57C
Condenser clip microphone (cardioid) for drums and percussion Whether on floor toms, snare drums or percussion instruments - with the patented clip-on bracket and integrated pre-amplifier, the TG D57c condenser microphone is assembled in seconds and ready for use. The extended frequency range ensures faithful reproduction of all types of drums and the 72 mm long flexible gooseneck allows the optimum orientation to the sound source.
|
|
top
|
|
K&M 24030 Microphone holder for drums
Specially designed bracket for attaching microphones to percussion instruments, small and compact. Easy and quick to assemble and disassemble. Vibration damping by rubber disc and a rubber insert. The clamping elements are captive and guarantee a completely secure hold.
|
|
|
|
top
|
|
K&M Microphone Stands
König and Meyer Microphone stands have an excellent reputation around the world for decades. Hardly a music studio, a concert event or an event that is not equipped with König & Meyer microphone stands. The sturdy, durable clamping elements, the mechanics and the build quality can totally convincing - and thus also offers entertainment Mallorca you only microphone stands by King and Meyer for rent. Various designs are in stock - more info on request.
|
|
|
|
|
DI & Audio-Tools
|
|
|
top
|
|
DI-Boxes // passive Palmer Pan 01 / 1 channel Passive DI box. Jack input with parallel output for looping through the signal. Transformer balanced XLR output. Input sensitivity switchable. Line and speaker signal levels can be processed.
Palmer Pan 04 / 2 channel The PAN-04 contains the double interior of a PAN-01 in one housing. This makes it a 2-channel passive DI box. Due to the "stereo" design, it is therefore predestined for the acceptance of corresponding keyboards and devices with multiple outputs.
|
|
top
|
|
DI-Boxes // active Palmer Pan 02 / 1-channel Standard Active DI box. Can be powered by 9V battery or 48V phantom power. High impedance input, higher output level than a passive DI box. The max. Output voltage for phantom power is +10 dBu. Output: transformer balanced.
LD Systems LDI 02 / 1-channel Active DI box in sturdy metal housing (aluminum / steel) with protective corners, silver metallic blue, internal battery (9V flashes during operation) is automatically switched off when using the phantom power (LED shows steady light), extremely low battery consumption. Battery: 9V block
|
|
|
|
|
Tents / Pavilion
|
|
|
top
|
|
Folding tent, gazebo 3x3 m - white
The folding tent 300 is particularly suitable as a decorative and effective sun protection for artists and DJs: Powder coated and made of hard steel. The tarps are 100% waterproof and made from a durable 600D polyester fabric that is UV resistant. The construction time is only 3-5 minutes with 2 people. Inner surface height: 2,40 m • Max. Top height: 3.10m
Also available: side wall closed and weights.
|
|
top
|
|
|
|
|
|
Our central warehouse is only a 12-minute drive from Palma Airport. Poligono Son Noguera - on the Ma-19 / Palma - Llucmajor / exit 22. Address: Calle Son Julia 11, Nave 6, 07609 Llucmajor.
|